SCF1300 Surface Shaped Sander
SCF1300A structure configuration diagram
Brush plate, brush plate swing, brush wheel and feed are used in Japan Mitsubishi inverter speed
Features:
- The machine uses a brush with abrasive to the wooden doors, furniture doors, window frames, etc. have uneven surface of the wooden pieces of sanding.
- In front of the two sets of brush plate, followed by three groups of brush on the uneven surface of the polished, brush and brush wheel are used frequency control, for different parts to adjust to achieve the best results.
- use touch screen interface, more intuitive, fast.
Technical Parameters:
|
Processing width |
50-1300 mm |
|
Processing thickness |
10-100 mm |
|
Processing length |
≥250 mm |
|
Brush speed |
60～300 rpm |
|
Brush plate swing |
20～60 Time/min |
|
Brush roll speed |
100～450 rpm |
|
Feeding speed |
4～18 m/min |
|
Total motor power |
32.6 kW |
|
Main motor power |
1.5kW×2，4kW×3 |
|
Working pressure |
0.6 Mpa |
|
Compressed air consumption |
0.01m3/min |
|
Air intake |
10000m3/h |
|
Suction wind speed |
20～22m/s |
|
Dimensions |
3920x2290x2265 mm |
|
Net weight |
5400kg |
